skf IR 17x21x20 Needle roller bearing components inner rings

b:mm; Dynamic (Ca):447 kN; B:50 mm; D:240 mm; Static (Coa):492 kN; b1:mm; d2 (max):mm; s:2.9 mm; r1s (min):3 mm; d2:110 mm;

J:148 mm; Weight:1.85 kg; Designation of housing:FA209N-; T min.:-40 °C; d:45 mm; T max.:100 °C; N:15mm; B:41.2 mm; e:22 mm; G:M6x1;

A:39 mm; T max.:100 °C; N:17.5mm; L:115 mm; J:157 mm; A1:16 mm; d1:69.9 mm; B:30.2 mm; Recommended tightening torque for set screw:8.3 Nm; Designation of housing:SFL210N-;

B:49.2 mm; Designation of housing:PE208N-; Weight:1.88 kg; C:29.6 kN; A1:30 mm; A:48 mm; L:179 mm; H2:99 mm; J:138 mm; Recommended tightening torque for set screw:8 Nm;

N1:21 mm; Designation of housing:PE207-; N:14mm; Recommended tightening torque for set screw:11.5 Nm; J:126 mm; C0:15.2 kN; B1:38.9 mm; T min.:-40 °C; Weight:1.6 kg; d1:51.1 mm;

Static load, C0:77 kN; Max operating temperature, Tmax:110 °C; D:160 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; da max:99 mm; da min:86 mm; f0:13.2; d:75 mm; Mass:3.02 kg; Dynamic load, C:113 kN;

N:16mm; C:35.1 kN; B:43.5 mm; Recommended tightening torque for set screw:8 Nm; J:111 mm; d:47.62 mm; e:22 mm; Designation of bearing:US210-30G2T04; Weight:2.5 kg; L:143 mm;

A4:30 mm; A2:46.5 mm; C0:29.2 kN; d:50.8 mm; N:19mm; Designation of bearing:US211-32G2; e:13 mm; G:M6x1; S:11.8 mm; B:45.3 mm;

T max.:100 °C; A2:40.2 mm; B:49.2 mm; Designation of open end cover:SCOU209-26; A:38 mm; T min.:-20 °C; A1:10 mm; Designation of bearing:UC209-26G2L4; L:160 mm; S:19 mm;

T max.:200 °C; T min.:-20 °C; s1:22.65 mm; Designation of bearing:US211-32G2T20; Weight:3.1 kg; C0:29.2 kN; H3:125; Designation of housing:FCE211-; S:11.8 mm; J:150 mm;

L:160 mm; N:16mm; A2:40.2 mm; Weight:2.67 kg; d:41.28 mm; A:38 mm; J:132 mm; T max.:100 °C; Dz:95 mm; e:10 mm;

L:145 mm; e:11 mm; Recommended tightening torque for set screw:8 Nm; A2:36 mm; d:38.1 mm; Designation of closed end cover:SCC208; T min.:-20 °C; H3:100; N:14mm; Designation of bearing:US208-24G2T20;

C:9.55 kN; Recommended tightening torque for set screw:3.2 Nm; J:76.5 mm; T max.:100 °C; A1:11 mm; Designation of bearing:US202-10G2T04; e:15 mm; N:12mm; S:6 mm; L:57 mm;

A1:12 mm; C:25.7 kN; L2:13 mm; H:102 mm; Designation of housing:T207N-; A:37 mm; T max.:200 °C; d:34.92 mm; P:230 mm; L1:78 mm;

Characteristic rolling element frequency, BSF:4.09 Hz; ra max:2 mm; da max:80.5 mm; Min operating temperature, Tmin:-25 °C; D:130 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; B:31 mm; Nlim (grease):5,400 rpm; Da max:119 mm; Brand:NTN;